Over time, all components on a phone experience some degree of degradation, and the battery's electrodes, electrolytes, separators, and current collectors are no exception. In this regard, the first suggestion given by the research team at the University of Michigan in Ann Arbor is to prevent exposure to excessively high or low temperatures, especially during charging. If the mobile phone overheats while charging, please remember to unplug the charger in time, and avoid charging in extremely cold conditions. Because extreme temperatures can accelerate the degradation of almost all battery components.
The battery level of the 24v 100ah lithium battery should not be overcharged or drained too low. Ideally, keep it slightly over 80% charged and over 20% remaining. The reason is that when the power exceeds 80% or less than 20%, it will put a lot of pressure on the lithium-ion battery, causing its performance to decline. If you really need 100% power, please remove the charger in time after it is fully charged to prevent the battery from working overnight. At the same time, be careful not to let the battery lose power for too long.
If possible, prevent rapid charging and discharging. Although fast charging is very convenient, the high current brings higher heat generation and greater risk of battery degradation. The same is true for the hazards of high discharge rates. Applications that consume a lot of power and operations that slam on the switch are also quite detrimental to the battery. In order to prevent the life of the 24v 100ah lithium battery from being shortened abnormally, please try to use low power and slow charging when conditions permit, unless you are really in a hurry. Finally, the research team recommends not using or storing lithium-ion batteries in wet environments, and to prevent mechanical damage such as punctures. To sum up, when using a 24v 100ah lithium battery, you need to pay attention to the ambient temperature, charge slowly and discharge slowly, do not leave the charger for a long time, and keep 20% to 80% of the power when it is not necessary.
24v 100ah lithium battery has almost no memory. When using lithium electric vehicles or lithium electric digital products, many friends like to use up all the power (protected by the protection board) and then charge it. In the eyes of many people, this is also a practice of activating the battery. In the use of lithium-ion batteries, we call the situation of recharging after running out of power as deep charge and discharge.
In fact, deep charge and discharge is a major misunderstanding that many people use when using 24v 100ah lithium batteries. Scientists have concluded through experiments that the number of deep charge and discharge is directly proportional to the battery life when other environmental conditions are constant. Charging and discharging can lead to premature end of battery life. Lithium-ion batteries whose service life has ended for a long time can easily cause battery swelling and other conditions, which can cause explosions.